Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.unesum.edu.ec/handle/53000/1390
Título : ANÁ LISIS ESTÁTICO NO LINEAL DEL EDIFICIO DE INGENIERÍ A CIVIL DE LA UNIVERSID AD ESTATAL DEL SUR DE MANABÍ
Autor : VILLAVICENCIO CEDEÑO, ERIK GABRIEL
ANDRADE FIGUEROA, EDWIN JEFFERSON
Fecha de publicación : 23-oct-2018
Editorial : JIPIJAPA-UNESUM
Citación : ANDRADE FIGUEROA EDWIN JEFFERSON(2018).ANÁ LISIS ESTÁTICO NO LINEAL DEL EDIFICIO DE INGENIERÍ A CIVIL DE LA UNIVERSID AD ESTATAL DEL SUR DE MANABÍ.Jipijapa.UNESUM.Facultad de Ciencias Técnicas.317pg
Resumen : El presente proyecto de investigación consiste en la aplicación del método Analisis está tico no lineal (Pushover) del edificio de la Carrera de Ingenieria Civil de la Universidad Est atal del Sur de Manabí, el cual a lo largo de su vida ú til se ha visto sometido a eventos sí smicos que pudiero n haber puesto en riesgo a los estudiantes que habitan el bloque de aulas, por lo que las edificaciones en el Ecuador especialmente en las zonas c osteras estan propensas a movimientos té l uricos, por ello es importante saber la capacidad de soportarlos y ver su funcionalidad en el momento de que estos o curren y afectan la estructura. Es por tal razón se da la nece s idad de evaluar el edificio mediante la técnica de pushover el cual permite predecir la respuesta estructural ante la acción de cargas laterales e incursion andola más allá de su lí mite elá stico. El método de “P ushover ” consiste en aplicar fuerzas lateral es incrementadas en la estructura distribuyendose monotónicamente a cada uno de los pisos hasta que la estructura alcance su máximo desplazamiento, es importante manifestar que al aplicar esta metodología los materiales deben ser definidos de forma no line al para que así incursionen en el rango inelástico. Como resultado se obtiene la cu rva que relaciona el cortante basal (V) versus el despl azamie nto en el tope de la estructura (D) demonimada curva de capacidad resistente. De tal manera se introducen mec á nismos de fallas para que la estructura discipe energí a y haya redistribución de momento s , estos mecanismos son las rótulas plásticas que mediante las normas del FEMA 356 y el ATC - 40 se pueden evaluar en que rango de desempeño se encuentra n los eleme ntos q ue conforman el edificio . Una vez que el edificio hay a incursionado en el rango inelá stico se conoce su punto de desempeño y su correspondiente nivel de desempeño esperado . Para la evaluación del edificio en estudio se utilizaron las normativas FEMA 356, ATC 40 y el C omité VISIÓN 2000 que proponen procedimientos no lineales para la evaluación y rehabilitación de edificios existentes y asi encontrar el nivel de desempeño estructural. Ad emás se hizo uso del sofware comercial Etab s 2016 para realizar la mode lación lineal del edificio que cumplan parámetros estableci dos en la NEC - 15 como derivas má ximas de piso, periodos y modos de vibración respectivamente. Y luego se hizo la modelación con los parámetros respectivos que permitieron realizar el análisis está tico no lineal y encontrar el punto de desempeño dando como resultado la seguridad de vida de los ocupantes
Descripción : The present project consists of th e application of the non - linear static Analysis Method (Pushover) of the building of the Civil Engineering Faculty of the Southern State University of Manabi, which throughout its useful life has been subjected to seismic events that could Having put at ri sk the students that inhabit the block of classrooms, so that the buildings in Ecuador especially in the coastal zones are prone to téluricos movements, therefore it is important to know the capacity to support them and to see their functionality At the ti me that these occur and affect the structure. It is for this reason that it is necessary to evaluate the building by means of the technique of pushover which allows to predict the structural response to the action of lateral loads and incursionandola beyon d its elastic limit. The Pushover method written in English literature consists of applying increased lateral forces in the distribuyendose structure monotonically to each of the floors until the structure reaches its maximum displacement, it is important to state that the Applying this methodology the materials must be defined in a non - linear way so that they enter the inelastic range. As a result we obtain the curve that relates the basal cutting (V) versus the displacement at the top of the structure (D) Demonimada curve of resistant capacity. In such a way they introduce RSA of faults so that the structure discipe energy and has redistribution of moments, these mechanisms are the plastic kneecaps that by the norm of the FEMA 356 and the ATC - 40 can be eva luated in which performance range is Encuentarn The elements that make up the structure. Once the structure has entered the inelastic range it is known its performance point and its corresponding performance level expected for the analyzed structure. For the evaluation of the building under study were used the regulations FEMA 356, ATC 40 and the Comitte Vision 2000 proposing non - linear procedures for the evaluation and rehabilitation of existing buildings and thus find the level of structural performance. In addition, the Etbas software was used to design the linear building that complied with parameters established in the NEC - 15 as maximum floor drifts, periods and vibration modes respectively. And then we made the mo deling with the respective parameters that allowed to perform the non - linear static analysis and find the point of performance resulting in the safety of life of th e occupants .
URI : http://repositorio.unesum.edu.ec/handle/53000/1390
Aparece en las colecciones: Tesis - Carrera de Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UNESUM-ECUADOR-ING.CIVIL-2018-36.pdfTesis a texto completo10,43 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons