http://repositorio.unesum.edu.ec/handle/53000/4803
Título : | DESARROLLO DE UN DISPOSITIVO DE DESINFECCIÓN Y CONTROL DE TEMPERATURA CON REGISTRO DE DATOS PARA LA SALA DE DOCENTES NÚMERO 1 DE LA CARRERA TECNOLOGÍAS DE LA INFORMACIÓN |
Autor : | MARCILLO PARRALES, KLEBER GERMINIANO SANTA CRUZ RODRÍGUEZ, KAREN GEOMARA |
Palabras clave : | Arduino Dispositivos |
Fecha de publicación : | 26-ene-2023 |
Editorial : | Jipijapa-Unesum |
Citación : | SANTA CRUZ RODRÍGUEZ KAREN GEOMARA(2023) DESARROLLO DE UN DISPOSITIVO DE DESINFECCIÓN Y CONTROL DE TEMPERATURA CON REGISTRO DE DATOS PARA LA SALA DE DOCENTES NÚMERO 1 DE LA CARRERA TECNOLOGÍAS DE LA INFORMACIÓN.JIPIJAPA-MANABÍ. FACULTAD DE CIENCIAS TÉCNICAS. 82 PG |
Resumen : | En el presente proyecto del prototipo de desinfección se realizó mediante la investigación y la problemática que existe en el complejo universitario de la carrera de Tecnologías de la Información, obteniendo así el beneficio para docente y estudiantes con el desarrollo y ensamble del prototipo desinfección y toma de temperatura debido a la emergencia sanitaria que se vive en estos momentos por el (COVID-19). Se estableció el criterio técnico para el desarrollo del dispositivo, y análisis del resultado, fue que sirvió para proteger a los docentes y estudiantes para así disminuir el contagio con este proyecto. De esta forma, el desarrollo de un dispositivo de desinfección y control de temperatura, cuenta con alarma de voz que muestra su temperatura normal, informan visualmente si la persona puede acceder o no al establecimiento, tomar las medidas preventivas necesarias y evitar algún posible contagio de COVID-19, debido a que la temperatura es uno de los síntomas frecuentes de esta enfermedad. La metodología realizada se basó en la orientación del método estadístico para la investigación y tabulación mediante una encuesta realizada a docentes y estudiantes de la carrera de Tecnologías de la Información. De acuerdo con el análisis realizado se concluye que se identifican factores de resguardo contra el COVID–19 apropiados, que se pueden utilizar en las instituciones, entre los más resaltantes que se puede mencionar para evitar la propagación es el constante monitoreo de temperatura, como también la desinfección de manos con gel antibacterial tomando en cuenta muchas de las normas de bioseguridad que se deben tener en consideración en durante el periodo de clases presenciales, finalmente se recomienda utilizar este documento de investigación como una referencia para posteriores investigaciones que conlleven a un adecuado estudio. |
Descripción : | The present project of the disinfection prototype was carried out through research and the problems that exist in the university complex of the Information Technology career, thus obtaining the benefit for teachers and students with the development and assembly of the prototype disinfection and temperature taking due to the sanitary emergency that is being experienced at this time by the (COVID-19). The technical criteria for the development of the device was established, and analysis of the result was that it served to protect teachers and students in order to reduce the contagion with this project. In this way, the development of a disinfection and temperature control device, has a voice alarm that shows its normal temperature, visually informs if the person can access or not to the establishment, take the necessary preventive measures and avoid any possible contagion of COVID-19, because the temperature is one of the frequent symptoms of this disease. The methodology used was based on the orientation of the statistical method for research and tabulation by means of a survey of teachers and students of the Information Technology career. According to the analysis carried out, it is concluded that appropriate COVID-19 protection factors are identified, which can be used in the institutions, among the most important ones that can be mentioned to prevent the spread is the constant monitoring of temperature, as well as the disinfection of hands with antibacterial gel taking into account many of the biosafety standards that should be taken into consideration during the period of on-site classes, finally it is recommended to use this research document as a reference for further research that lead to an adequate study. |
URI : | http://repositorio.unesum.edu.ec/handle/53000/4803 |
Aparece en las colecciones: | Tesis Ingeniería en Tecnología de la Información |
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
Santa Cruz Rodriguez Karen Geomara.pdf | Tesis a Texto Completo | 3,38 MB | Adobe PDF | ![]() Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons