http://repositorio.unesum.edu.ec/handle/53000/1679
Título : | Diseño DeUn Puente Peatonal Sobre La AvenidaJosé María Urbina Frente Al Parque Forestal De La Ciudad De Portoviejo |
Autor : | Marcillo Merino, Gery Lorenzo AGUIRRE SUAREZ, JEAN ALEXANDER |
Fecha de publicación : | may-2019 |
Editorial : | JIPIJAPA-UNESUM |
Citación : | AGUIRRE SUAREZ JEAN ALEXANDER(2019).Diseño DeUn Puente Peatonal Sobre La AvenidaJosé María Urbina Frente Al Parque Forestal De La Ciudad De Portoviejo.Jipijapa.UNESUM.Facultad de Ciencias Tecnicas.193pg |
Resumen : | Este proyecto de investigación inicia tomando en cuenta todas las consideraciones generales para el diseño y evaluación de un puente, y posteriormentese establece un prediseño del mismo, todos estos parámetros están basados en la norma AASTHO LRFD (2014).El diseño del puente peatonal se ubica sobre la avenida José María Urbina y tendrá una altura de 6,30m, constara de elementos estructurales de hormigón armado y estructuras metálicas para lo cual se realizó su respectivo pre dimensionamiento y comprobación de sus elementos estructurales para su cimentación se realizó una zapata aislada la cual es recomendable por el tipo de suelo en la cual estará ubicada esta.Su modelación se lo realizo mediante un software exclusivamente para puentes CSIBRIDGEV19, la estructura se modelo con la opción BRIDGEWIZARD en la cual se ingresan todo los parámetros del puente peatonal como geometría, tipos de cargas y espectro elástico, de esta manera se pudo comprobar que la estructura responde de forma satisfactoria bajo el comportamiento de eventos naturales. |
Descripción : | This research project starts by taking into account all the general considerations for the design and evaluation of a bridge, and then a pre-design of the bridge is established, all these parameters are based on the AASTHO LRFD (2014)The design of the pedestrian bridge is located on Avenida José María Urbina and will have a height of 6.30m, consisting of structural elements of reinforced concrete and metal structures for which its respective pre-dimensioning and verification of its structural elements for its foundation was made an insulated shoe was made, which is recommended by the type of soil in which it will be located.Its modeling was done using software exclusively for bridges CSIBRIDGEV19, the structure was modeled with the option BRIDGEWIZARD in which all the parameters of the pedestrian bridge are entered, such as geometry, types of charges and elastic spectrum, thus it was possible to verify that the structure responds satisfactorily under the behavior of natural events. |
URI : | http://repositorio.unesum.edu.ec/handle/53000/1679 |
Aparece en las colecciones: | Tesis - Carrera de Ingeniería Civil |
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UNESUM-ECUADOR-ING.CIVIL-2019-11.pdf | Tesis a texto completo | 6,69 MB | Adobe PDF | ![]() Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons